Exmark Lazer Z X-Series 60" Mower
Inquire
Specifications
EQUIPMENT
Width / Cutting Deck
Drive
Starter
Steering Control
Caster Forks
Front Caster Tires
Drive Tires
Safety Package
Parking Brake
Tractor Frame
Blade Spindles
Electrical
Standard Features
Seat
POWER COMPONENTS
Engine Brand
Transmission Speeds
Engine Model
Engine Displacement
Engine Series
Speed
Engine Spec
Engine Speed
Air Filter
Fuel Capacity
Drive Description
Fuel Type
PTO Engagement
Drive Wheel Release
Fuel Indicator
Deck Lift
Carb Compliant
ROPS
DECKS
Deck Style
Deck Style Description
Deck Construction
Cutting Heights
Blade Tip Speed
Blades
DIMENSIONS
Width
Height
Curb Weight
Length
60"
In Stock
60"
Hydro-Drive
Electric
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. Adjustable dampers (3 positions) to customize drive responsiveness
.50" thick caster yoke arms.
13 x 6.5-6, smooth tread, semi-pneumatic
24 x 12-12, 4 ply Grassmaster TL
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Lever actuated disc brake
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
12-volt battery with 15-amp alternator.
Engine hour meter, USB plug-in, LED lights, phone tray and cup holder
Deluxe, three-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Kawasaki®
Infinitely Variable
FX801V
852
V-Twin
Infinitely variable speed selection from 0–11.5 mph forward, 0–7.0 mph reverse
FX801V
3,750 RPM
Heavy-duty canister air filtration system
12-gallon single fuel tank with single fill location
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Gas Carbureted
MagStop electromagnetic 200-ft-lb clutch with spot brake
Allows unit movement without engine running.
Yes - electronic Sender
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Equipped with Adapt system.
No
2-post foldable ROPS standard with seat belt and latch.
Floating Deck
Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
1.0" to 5.5" in 0.25" increments
Approximately 18,500 fpm
3 Blades at 20.50" Length
72.8"
70.5"
1209
83.1"