Exmark Lazer Z E-Series 52" Mower
Inquire
Specifications
EQUIPMENT
Width / Cutting Deck
Drive
Starter
Steering Control
Caster Forks
Front Caster Tires
Drive Tires
Safety Package
Parking Brake
Tractor Frame
Blade Spindles
Electrical
Standard Features
Seat
POWER COMPONENTS
Transmission Speeds
Engine Brand
Engine Model
Engine Displacement
Speed
Engine Series
Fuel System
Engine Spec
Engine Speed
Air Filter
Fuel Capacity
Drive Description
PTO Engagement
Fuel Type
Fuel Indicator
Drive Wheel Release
Deck Lift
Carb Compliant
ROPS
DECKS
Deck Style
Deck Style Description
Deck Construction
Cutting Heights
Blade Tip Speed
Blades
DIMENSIONS
Width
Height
Curb Weight
Length
52"
In Stock
52"
Hydro-Drive
Electric
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
.50" thick caster yoke arms.
13 x 6.5-6, smooth tread, pneumatic. Sealed Ball Bearings
24 x 9.5-12, 4 ply Super Turf TL
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Lever actuated internal wet disc brake
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
12-volt battery with 15-amp alternator.
Engine hour meter and cup holder
Deluxe suspension seat, foam flip-up armrests, and integral safety switch. Adjustment: Fore and aft fom Operators Position
Infinitely Variable
Kawasaki®
FX730V
726cc
Infinitely variable speed selection from 0–11.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
V-Twin
Carbureted
FX730V
3700 RPM
Heavy-duty canister air filtration system
9.5-gallon single fuel tank with single fill location
Dual Hydro-Gear ZT-4400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
MagStop Electromagnetic 175 ft-lb clutch with spot brake
Gas Carbureted
Yes - Mechanical float
Allows unit movement without engine running.
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
No
2-post foldable ROPS standard with seat belt and latch.
Floating Deck
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt, and 7-gauge reinforcement plate welded to spindle mounting locations for improved strength.
1.5" to 5.5" in 0.25" increments
Approximately 18,500 fpm
3 blades at 18.00" length
64.7"
70.1"
1019
84.6"