Exmark Radius S Series Mowers
Inquire
Specifications
EQUIPMENT
Onboard Intelligence
Starter
Steering Control
Front Caster Tires
Drive Tires
Parking Brake
Tractor Frame
Blade Spindles
Cup Holder
Electrical
Standard Features
Seat
POWER COMPONENTS
Transmission Speeds
Engine Brand
Transmission Brand
Engine Model
Engine Displacement
Transmission
Engine Series
Fuel System
Speed
Drive
Engine Spec
Engine Speed
Air Filter
Fuel Capacity
Drive Description
Fuel Type
PTO Engagement
Drive System
Drive Wheel Release
Fuel Indicator
Deck Lift
Carb Compliant
Safety Package
ROPS
DECKS
Deck Style
Deck Style Description
Width / Cutting Deck
Deck Construction
Cutting Heights
Blade Tip Speed
Blades
DIMENSIONS
Width
Height
Length
Curb Weight
48"
In Stock
none
Electric
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings (126-3289)
23 x 9.5-12 Super Turf TL
Lever-actuated pawl brake.
Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Yes
12-volt battery with 15-amp alternator.
Engine hour meter, cup holder, tow hitch and jack receiver
Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
Infinitely Variable
Kawasaki
Hydro-Gear
FX651V
726
Hydrostatic
V-Twin
Carbureted
Infinitely variable speed selection from 0–9.0 mph forward, 0–5.0 mph reverse
Hydro-Drive
FX651V_S13
3,800 rpm
Cyclonic Air Cleaner
7-gallon single fuel tank with single fill location
Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Gas Carbureted
MagStop electromagnetic 125-ft-lb clutch
Hydro-Drive
Allows unit movement without engine running.
Translucent Visual
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
No
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators
2-post foldable ROPS standard with seat belt and latch.
Floating Deck
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute
48"
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
1.5" to 5.0" in 0.25" increments
Approximately 18,500 fpm
2 Blades at 24.5" Length
61"
69.7"
82.9"
900
52"
In Stock
none
Electric
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings (126-3289)
23 x 9.5-12 Super Turf TL
Lever-actuated pawl brake.
Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive.
12-volt battery with 15-amp alternator.
Yes
Engine hour meter, cup holder, tow hitch and jack receiver
Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
Kawasaki
Hydro-Gear
Infinitely Variable
FX691V
726
V-Twin
Carbureted
Infinitely variable speed selection from 0–9.0 mph forward, 0–5.0 mph reverse
Hydrostatic
Hydro-Drive
FX691V_S25
3,800 rpm
Cyclonic Air Cleaner
7-gallon single fuel tank with single fill location
Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Gas Carbureted
MagStop electromagnetic 125-ft-lb clutch
Hydro-Drive
Allows unit movement without engine running.
Translucent Visual
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
No
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
2-post foldable ROPS standard with seat belt and latch.
Floating Deck
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
52"
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
1.5" to 5.0" in 0.25" increments
Approximately 18,500 fpm
3 Blades at 18.00" Length
64.3"
69.7"
923
80.3"
60"
In Stock
none
Electric
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings (126-3289)
23 x 10.5-12 Super Turf TL
Lever-actuated pawl brake.
Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive.
Yes
12-volt battery with 15-amp alternator.
Engine hour meter, cup holder, tow hitch and jack receiver
Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
Infinitely Variable
Kawasaki
Hydro-Gear
FX730V
726
Hydrostatic
Infinitely variable speed selection from 0–9.0 mph forward, 0–5.0 mph reverse
V-Twin
Carbureted
Hydro-Drive
FX730V_S26
3,800 rpm
7-gallon single fuel tank with single fill location
Cyclonic Air Cleaner
Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Gas Carbureted
MagStop electromagnetic 125-ft-lb clutch
Hydro-Drive
Allows unit movement without engine running.
Translucent Visual
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
No
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
2-post foldable ROPS standard with seat belt and latch.
Floating Deck
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
60"
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
1.5" to 5.0" in 0.25" increments
Approximately 18,500 fpm
3 Blades at 20.50" Length
72.3"
69.7"
973
80.5"